Control Devices

General terms of use (5524)
This bidirectional single-frequency remote control is specific for controlling alarm panels within the limits of the useful range (tens of meters) avoiding delays alarms necessary to put out of service from inside the premises.
General information on use (5023E)
This monodirectional single-frequency remote control is used to control alarm centers in the limits of the useful range (tens of meters) avoiding the alarm delays necessary for the MHS from inside the premises. The device can also be used for direct commands sent to RX receivers.

Control Devices

5524 PCK HT
5023E PCK
Two-way rolling code remote control
Remote control for emergencies

General use (5524)
This bidirectional single-frequency remote control is specific for controlling alarm panels within the limits of the useful range (tens of meters) avoiding the alarm delays necessary to put out of service from inside the premises.
General use (5023E)
This one-way, single-frequency remote control allows control panels to be controlled within the useful range (tens of meters) while avoiding the alarm delays necessary for MHS from inside the premises. The device can also be used for direct commands sent to RX receivers.
5524
Dimensions (h × w × d)
89.5 × 28.8 × 17.8 mm
Weight
0.028 Kg
Environment class
2 - General interior
Case
ABS
Certifications
EN 50131
5023E
Dimensions (h × w × d)
68 × 35.6 × 17 mm
Weight
0.028 Kg
Environment class
2 - General interior
Case
ABS
Food
2 lithium batteries 3V type CR 2016, allowing an autonomy of about two years with normal use.
Radio transmission / reception
Single frequency (433 MHz) in accordance with EU law. Range adequate for use.
Control and test
The test is implicit during each operation through the confirmation of the order sent.
5524 Device functions
1) Full (red button) or partial (white button - zones A + B) arming command, or disabled (green button).
2) Alarm control from the control panel (yellow button) or home automation activation with RX receivers (example: opening a gate)
3) Use with 5541 and 5542 receivers: red-green keys = bistable command - white / yellow keys = 2 different monostable commands.
Local signaling of the device following an MES maneuver
and / or disarmed The LED of the remote control visualizes the transmission (orange) and changes color upon receiving the confirmation from the control unit: it turns red after activation and green after deactivation.
5023E Device functions
Request for help; sending a radio signal by pressing the key.
Local signals of the device
By pressing the key, the ouge LED visualizes the transmission.