MANUAL RELEASE FOR EMERGENCY EXIT
Aesthetic and discreet, the MDs in the NEMO range are ideal for establishments open to the public (ERP) and establishments receiving workers (ERT).
Thanks to their small projection (35 mm), they do not require mounting.
They operate by double contact for the release of emergency exits and are equipped with an anchor point for the installation of a seal. The reset is carried out using a key on the front panel, accessible regardless of the position of the manual call point.
Thanks to their small projection (35 mm), they do not require mounting.
They operate by double contact for the release of emergency exits and are equipped with an anchor point for the installation of a seal. The reset is carried out using a key on the front panel, accessible regardless of the position of the manual call point.
GENERAL CHARACTERISTICS
Alarm contacts: 1 changeover dry contact max. 125 Vdc 1 A or 30 Vdc 0.5 A
Operating voltage: 24 V or 48 V
Operating temperature: -10 ° c to + 50 ° c
PHYSICAL CHARACTERISTICS
Dimensions: H 90mm x W 90mm x D 35mm
Color / material: Green ABS
Weight: 107g
Protection index: IP44 / IK07
COMPATIBILITY
Alarm contacts: 1 changeover dry contact max. 125 Vdc 1 A or 30 Vdc 0.5 A
Operating voltage: 24 V or 48 V
Operating temperature: -10 ° c to + 50 ° c
PHYSICAL CHARACTERISTICS
Dimensions: H 90mm x W 90mm x D 35mm
Color / material: Green ABS
Weight: 107g
Protection index: IP44 / IK07
COMPATIBILITY